Philips CMD310 Car Stereo System User Manual


 
10 EN
Connector Connect to
4 Red wire The +12V power terminal
which is live in the accessory
(ACC) position of the ignition
switch. If there is no accessory
position, connect to the +12V
car battery terminal that is
always live. Make sure that the
black ground (earth) lead is
connected to a metal surface
ofthecarrst.
5 Green and
green/black
wires
Left speaker (rear)
6 White and
white/black
wires
Left speaker (front)
7 Gray and
gray/black
wires
Right speaker (front)
8 Purple
and
purple/
black
wires
Right speaker (rear)
2 Connect the other end of the supplied
standard connector to the car audio
system.
a
b
c
d
e
f
g
h
Connector Connect to
1 ANTENNA Antenna for radio
2 External Mic An external
microphone for
phone call
3 SUBWOOFER
(Socket)
Subwoofer
4 REAR LINE OUT L
(Socket)
Rear left speaker
5 REAR LINE OUT R
(Socket)
Rear right speaker
6 OE REMOTE (Brown) OE remote
7 FRONT LINE OUT L Front left speaker
8 FRONT LINE OUT R Front right
speaker
Tip
The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Be sure to make
proper connections to prevent damage to the system.