Philips JENHR1D Car Video System User Manual


 
11
Playing DVDs
Press the screen release button and raise the screen to insert a DVD disc. Snap
the DVD disc onto the hub (spin the disc with your nger to make sure the disc is
seated properly).
Lower and close the LCD screen, disc playback will not start until the screen is
closed for safety reasons. When the DVD menu appears press the play button.
Playing USB
The System will detect the insertion of the USB media automatically if no disc is
loaded. The system only auto detects the rst media inserted (DVD, SD Card or USB
drive); the second media source, USB, SD Card or CD disc must be manually selected
by pressing the DVD source button on the remote control.
When a disc is inserted, the system will switch to DVD mode immediately regardless
if USB media is currently playing. The DVD source (DVD or USB) can only be
changed while the DVD is not playing. When a USB device is loaded in the player,
the navigation menu appears automatically.
1. Press the cursor button p or q to move the highlight to the desired folder and
press ENTER to display the contents in the folder.
2. Press the cursor button p or q to move the highlight to the desired le in the
folder and press ENTER to begin playback of the highlighted le.
Note: The System supports:
Files: MP3 and JPEG les only.
File systems: FAT16 and FAT32
The system will NOT support:
Files: BMP, M4P, WAV, ASF, H.264, DivX, WMA
File systems: NTFS, ExFAT
The system will always default to the DVD when the system detects a disc in the
DVD player.
Playing Audio CDs
When playing an audio CD, the DISPLAY banner appears automatically. The track
number and the elapsed time of the disc are displayed.
Selecting a Track
Selection of a specic track is accomplished by using the numbers keys. Press the
number key corresponding to the desired track and press ENTER and the player will
implement the selection.
Using the REPEAT feature
The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively
changes the repeat options
TRACK – repeat the track that is playing.
ALL – repeat the entire disc that is playing.
REPEAT OFF – repeat is turned o.