Filter
Top Products
9EN
Program tracks
Note
You can program a maximum of 20 tracks.
During programming, if no operation is made within
20 seconds, the system returns to stop mode without
saving programmed tracks.
For a CD
1 Press to stop play.
» The total number of tracks is displayed.
2 Press PROG to activate the programming.
» PROG is displayed, and
blinks.
3 Press / (or ALBUM - /ALBUM +)
to select a track.
» The track number blinks.
4 Press PROG again to program the selected
track.
5 Repeat steps 3 and 4 to program more
tracks.
6 Press to start play.
For a WMA/MP3 disc
1 Press to stop play.
» The total number of tracks is displayed.
2 Press PROG to activate the programming.
» PROG is displayed, and
blinks.
3 Press / (or ALBUM - /ALBUM +)
repeatedly to select an album.
» The album number and ALB blinks.
4 Press PROG
album.
» A track number is displayed, and ALB
disappears.
5 Press / (or ALBUM - /ALBUM +)
repeatedly to select a track.
6 Press PROG
track.
7 Repeat steps 3 to 6 to program more
tracks.
8 Press to start play.
Erase the program
To erase the program,
Press
twice.
Slide the power switch and source selector.