Filter
Top Products
10 EN
5 Play from a USB
storage device
are copied onto a supported USB storage
device:
Flash drive
Memory card reader
HDD: hard disc drive (This product can
detect only a portable HDD with USB
power peak current no more than 500
mA.)
Note
Philips does not guarantee compatibility with all USB
storage devices.
supported.
1 Slide the power switch and source selector
to USB.
2 Connect the USB storage device to the
USB DIRECT socket.
» Play starts automatically after a few
seconds.
If play does not start automatically,
press
to start play.
Control play
During play, follow the instructions below to
control play.
Buttons Function LCD displays
Start or resume
play.
the track number,
WMA/MP3 (track
format),
, and
Pause play. the track number,
WMA/MP3 (track
format),
, and
(blinking)
Stop play. the total number
of tracks,
WMA/MP3 (track
format), and
/ Press to skip to
the previous or
next track.
the track number,
WMA/MP3 (track
format),
, and
/ Press and hold
to rewind or
search forward
fast within a
track.
the track number,
WMA/MP3 (track
format),
, and
ALBUM - /
ALBUM +
Skip to the
previous or next
album when no
less than one
album exists.
the album number,
ALB, WMA/MP3
(track format),
and
Program tracks
Note
You can program a maximum of 20 tracks.
During programming, if no operation is made within
20 seconds, the system returns to stop mode without
saving programmed tracks.