Philips MCM1120 Car Stereo System User Manual


  Open as PDF
of 22
 
8 EN
3 Releasethesocketap.
Connect power
Caution
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
• Before you connect the AC power cord, make sure that
you have completed all other connections.
abc
Prepare the remote control
Caution
• Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
• Risk of decreased battery life! Never mix different
brands or types of batteries.
• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
• Danger of explosion if battery is incorrectly replaced.
Replaceonlywiththesameorequivalenttype.
To insert the remote control battery:
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Turn on
Press to turn on.
» The unit switches to the last selected
source.
Tip
• In standby mode, you can also press CD, TUNER, MP3
LINK to switch on the unit.
Switch to standby mode
Press again to switch the unit to standby
mode.
» The clock (if set) appears on the display
panel.
 previous next