Filter
Top Products
13EN
Program radio stations
manually
Note
• You can program a maximum of 20 preset radio
stations.
1 Tune to a radio station.
2 Press PROG to activate programming
mode.
3 Press ALB/PRESET+/- to select a number
from 1 to 20 for this radio station, then
press PROGtoconrm.
» Thepresetnumberandthefrequency
of the preset station are displayed.
4 Repeat steps 2-3 to program other
stations.
Note
• To overwrite a programmed station, store another
station in its place.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1 Tune to an RDS station.
2 Press RDS repeatedly to scroll through the
following information (if available):
» Station name
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» Radio text
» Frequency
Synchronize clock with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1 Tune to a RDS radio station that transmits
time signals.
2 Press RDS for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
» If no time signal is received, [NO CT]
is displayed.
Note
• The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.