Filter
Top Products
11EN
4 Press / to select a track number, then
press PROGtoconrm.
5 Repeat steps 3 and 4 to program more
tracks.
6 Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
» To erase the program, press when
play is stopped.
Listen to tape
Note
• When you play or record a tape, the sound source
cannot be changed.
• To record, use only "Normal" (IEC type I) tapes on
which the write-protect notches (tabs) are not broken.
Play a tape
1 Press TAPE to select the tape source, and
pull to open the tape button cover on the
front.
2 Press to open the tape door.
3 Load a tape with the open side downward
and the full spool to the left, and close the
tape door.
4 Close the tape door.
5 Press to start play.
• To pause or resume play, press .
• To stop the play, press .
• To fast rewind or wind the tape, press
/ .
Record from CD to tape
1 Press CD to select the CD source.
2 Load a disc.
• To record from the beginning of the
disc, stop disc play from the beginning.
• To record a section of the disc, stop
disc play from the beginning of the
section.
3 Pull to open the tape button cover on the
front.
4 Press to open the tape door.