Filter
Top Products
12
ENGLISH ESPAÑOL DEUTSCH FRAN
ÇAIS
ITALIANO NEDERLANDS
Fastening the unit to the factory radio mounting bracket. (Fig. 14) (Fig. 15)
Select a position where the screw holes of the bracket and the screw holes of this product become
aligned (are fitted), and tighten the screws at 2 places on each side. Use any of binding screws (4
×
3 mm), binding screws (5 × 6 mm) or flush surface screws (5 × 6 mm), depending on the shape of
the screw holes in the bracket.
*1 Use binding screws (4 × 3 mm) only.
Fig. 14
Fig. 15
11
13
12
*
1
*
1
Screw
Dashboard or Console
Factory radio mounting bracket