Filter
Top Products
Using Bluetooth wireless
technology
Connection menu operation
Important
! Be sure to park your vehicle in a safe place
and apply the parking brake when performing
this operation.
! Connected devices may not operate properly if
more than one is connected at a time. Con-
necting one device at a time is recommended.
1 Press and hold to display the con-
nection menu.
# You cannot operate this step during a call.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
! When the control mode is set to CTRL iPod/
CTRL APP, only PAUSE or S.RTRV is avail-
able.
DEVICELIST (connecting or disconnecting a device
from the device list)
! When no device is selected in the device list, this
function is not available.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name ofa device you want
to connect/disconnect.
! Press and hold M.C. toswitch the Bluetooth
device address and device name.
3 Press M.C.to connect/disconnect the selected de-
vice.
If the connection is established, * is indicated on
the device name.
DEL DEVICE (deleting a device from the device list)
! When no device is selected in the device list, this
function is not available.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name ofa device you want
to delete.
! Press and hold M.C. toswitch the Bluetooth
device address and device name.
3 Press M.C. to display DELETE YES.
4 Press M.C. to delete a device information from
the device list.
! While this function is in use, do not turn off the
engine.
ADD DEVICE (connecting a new device)
1 Press M.C. to start searching.
! To cancel, press M.C. while searching.
2 Turn M.C. to select a device from the device list.
! If the desired device is not displayed, select
RE-SEARCH.
! 6-digit number appears on the display of this
unit. Once the connection is established, this
number disappears.
! Press and hold M.C. toswitch the Bluetooth
device address and device name.
3 Press M.C. to connect the selected device.
! To complete the connection, check thedevice
name (DEH-4400BT) and enter the PIN code
on your device.
! PIN code is set to 0000 as thedefault. You
can change this code.
! If you are unable to complete the connection
using this unit, use the device to connect to
the unit.
! If 3 devices are already paired, DEVICEFULL is
displayed and it is not possible to perform this
operation. In this case, delete a paired device
first.
SPCLDEVICE (setting a special device)
Bluetooth devices that are difficult to establish a con-
nection with are called special devices. If your
Bluetooth device is listed as a special device, select
the appropriate one.
1 Press M.C. to display the setting mode.
! If 3 devices are already paired, DEVICEFULL is
displayed and it is not possible to perform this
operation. In this case, delete a paired device
first.
2 Turn M.C. to display a special device. Press to se-
lect.
3 Turn M.C. to display this unit’s device name,
Bluetooth device address and PIN code.
4 Use a device to connect to this unit.
! To complete the connection, check thedevice
name (DEH-4400BT) and enter the PIN code
on your device.
! PIN code is set to 0000 as thedefault. You
can change this code.
A. CONN (connecting to a Bluetooth device automati-
cally)
1 Press M.C. to turn automatic connection on or
off.
VISIBLE (setting the visibility of this unit)
En
14
Section
02
Operating this unit