Filter
Top Products
PLAY (play)
1 Press M.C. to start playback.
STOP (stop)
1 Press M.C. to stop theplayback.
PAUSE (pause)
1 Press M.C. to turn pause on.
Phone menu operation
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1 Press to display the phone menu.
# When PW SAVE is on, you cannot display the
phone menu. For details about the settings, refer
to PW SAVE (power saving) on page 19.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
MISSED (missed call history)
DIALLED (dialed call history)
RECEIVED (received call history)
1 Press M.C. to display the phone number list.
2 Turn M.C. to select a name or phonenumber.
! When you find a phone number that you want
to store in memory, press and hold oneof the
preset tuning buttons (1 to 6).
! Press one of presetbuttons 1 to 6 to recall the
desired preset number.
3 Press M.C. to make aca ll.
PHONE BOOK (phone book)
! The phone book in your cellular phone will be
transferred automatically when the phone is con-
nected to this unit.
! Depending on the cellular phone, the phone book
may not be transferred automatically. In this case,
operate your cellular phone to transfer the phone
book. The visibility of this unit should be on.Refer
to VISIBLE (setting the visibility of this unit) on
page 14.
1 Press M.C. to display SEARCH (alphabetical list).
2 Turn M.C. to select the first letter ofthe name you
are looking for.
! Press and hold M.C. toselect the desired
character type.
TOP (alphabet)–ΟΛΑ (Greek alphabet)–ВСЕ
(Cyrillic alphabet)
3 Press M.C. to display a registered name list.
4 Turn M.C. to select the name you arelooking for.
5 Press M.C. to display the phone number list.
6 Turn M.C. to select a phone number youwant to
call.
! When you find a phone number that you want
to store in memory, press and hold oneof the
preset tuning buttons (1 to 6).
! Press one of presetbuttons 1 to 6 to recall the
desired preset number.
7 Press M.C. to make aca ll.
PRESET 1-6 (preset phone numbers)
1 Press M.C. to display the setting mode.
2 Use M.C. to select the desired preset number.
Turn to change the menu option. Press to select.
! You can also press one of the preset number
buttons 1 to 6 to select a number.
3 Press M.C. to make aca ll.
PHONE FUNC (phone function)
You can set A. ANSR and R.TONE from this menu.
For details, refer toFunction and operation on this
page.
Function and operation
1 Display PHONE FUNC.
Refer to PHONE FUNC (phone function) on
this page.
2 Press M.C. to display the function
menu.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
En
16
Section
02
Operating this unit