Filter
Top Products
1 Press M.C. to turn the demo display on or off.
! If PW SAVE is on, DEMO cannot be selected.
SCROLL (scroll mode setting)
When ever scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
1 Press M.C. to turn the ever scroll on or off.
BTAUDIO (Bluetooth audio activation)
You need to activate the BTAUDIO source in order to
use a Bluetooth audio player.
1 Press M.C. to turn the BTAUDIO source on or off.
TITLE (multi-language)
This unit can display the text information of a com-
pressed audio file even if they are embedded in a
Western European or Russian language.
! If the embedded language and the selected lan-
guage setting are not the same, text information
may not display properly.
! Some characters may not be displayed properly.
1 Press M.C. to select the desired setting.
EUR (European)—RUS (Russian)
PW SAVE (power saving)
Switching this function on enables you to reduce the
consumption of battery power.
! Turning on the source is the onlyoperation al-
lowed when this function is on.
1 Press M.C. to turn the power save on or off.
BT CLEAR (resetting the Bluetooth wireless technol-
ogy module)
Bluetooth device data can be deleted. Toprot ect per-
sonal information, we recommend deleting this data
before transferring the unit to other persons. The fol-
lowing settings will be deleted.
! phone book entries on the Bluetooth telephone
! preset numbers on the Bluetooth telephone
! registration assignment of the Bluetooth tele-
phone
! call histor y of the Bluetooth telephone
! information of the connected Bluetooth telephone
! PIN code of the Bluetooth device
1 Press M.C. to showthe confirmation display.
YES is displayed. Clearing memory is now on
standby.
If you do not want to reset phone memory, turn
M.C. to display CANCEL and press to select.
2 Press M.C. to clear thememory.
CLEARED is displayed and the settings are de-
leted.
! While this function is in use, do not turn off
the engine.
BT VERSION (Bluetooth version display)
You can display the system versions of this unit and
of Bluetooth module.
1 Press M.C. to display the information.
S/W UPDATE (updating the software)
This function is used to update this unit with thelat-
est software. For information on the software and up-
dating, refer to our website.
! Never turn the unit off while the software is being
updated.
1 Press M.C. to display the data transfer mode.
Follow the on-screen instructions to finish updat-
ing the software.
Switching the dimmer setting
You can adjust the brightness of illumination.
% Press and hold
.
Using an AUX source
1 Insert the stereo mini plug into the
AUX input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to AUX
(auxiliary input) on the previous page.
En
19
Section
02
Operating this unit
Operating this unit