Filter
Top Products
Indicator State
1
Main dis-
play sec-
tion
! Tuner: band and frequency
! RDS: program service name,
PTY information and other lit-
eral information
! Built-in CD, USB storage de-
vice and iPod: elapsed play-
back time and text
information
2
(list)
The list function is being oper-
ated.
3
(iPod
control)
This unit’s iPod function is oper-
ated from your iPod.
4 LOC Local seek tuning is on.
5
(TA) TA function is on.
6
(TP) ATP station is tuned in.
7
(repeat) Trackor folderrepeat is on.
8
(ran-
dom/shuf-
fle)
Random play is on.
The iPod source is selected and
the shuffle or shuffle all function
is on.
9
(auto
answer)
Shows when the automatic an-
swering function is on.
a
(Bluetooth
indicator)
Connected to a Bluetooth device.
The line is on hold.
b
(sound re-
triever)
The sound retriever function is
on.
Set up menu
When you turn the ignition switch to ON after
installation, set up menu appears on the dis-
play.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES. Press M.C.
to select.
# If you do not operate for 30seconds, the set
up menu will not be displayed.
# If you prefer not to set up at this time, turn
M.C. to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
3 Perform the following procedures to
set the menu.
To proceed to the next menu option, you need
to confirm your selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm theselection.
FM STEP (FM tuning step)
Normally, the FM tuning stepemployed by seek tun-
ing is 50kHz. When AFor TA is on,the tuning step
automatically changes to 100kHz. It may be prefer-
able to set the tuning step to 50kHz when AF is on.
! The tuning step remains at 50kHz during manual
tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm theselection.
DEMO (demo display setting)
1 Turn M.C. to set the demo display toon or off.
2 Press M.C. to confirm theselection.
TITLE (multi-language)
This unit can display the text information of a com-
pressed audio file even if they are embedded in a
Western European or Russian language.
! If the embedded language and the selected lan-
guage setting are not the same, text information
may not display properly.
! Some characters may not be displayed properly.
1 Turn M.C. to select the desired setting.
EUR (European)—RUS (Russian)
2 Press M.C. to confirm theselection.
QUITappears.
En
5
Section
02
Operating this unit
Operating this unit