Filter
Top Products
SW setting1 (subwooferon/off setting)
This unitis equippedwith asubwooferoutput which
can beturned onor off.
1 PressM.C. todisplay thesetting mode.
2 TurnM.C. toselect the desiredsetting.
Normal (normalphase)—Reverse (reverse
phase)—OFF (subwooferoff)
3 PressM.C. toconfirm theselection.
SW setting2 (subwooferadjus tment)
The cut-offfrequencyand outputlevel canbe ad-
justed whenthe subwooferoutput is on.
Only frequencieslower thanthose in theselected
range areoutputted fromthe subwoofer.
1 PressM.C. todisplay thesetting mode.
2 PressM.C. tocycle between cut-offfrequency and
output levelof subwoofer.
3 PressM.C. toswitch tocut-offfrequencyand then
turn M.C.to selectcut-off frequency.
50Hz—63Hz—80Hz—100Hz—125Hz
4 PressM.C. toswitch tooutput level andthen turn
M.C. toadjust outputlevel.
Adjustment range:+6 to-24
HPF setting(high passfilter adjustment)
When youdo notwant lowsounds from thesubwoo-
fer outputfrequency rangeto play fromthe frontor
rear speakers,turn onthe HPF (highpass filter).Only
frequencies higherthan thosein the selectedrange
are outputfrom thefront orrear speakers.
1 PressM.C. todisplay thesetting mode.
2 TurnM.C. toselect the cut-offfrequency.
OFF (off)—50Hz—63Hz—80Hz—100Hz—125Hz
3 PressM.C. toconfirm theselection.
Bass booster(bass boost)
1 PressM.C. todisplay thesetting mode.
2 TurnM.C. toadjust the level.
Adjustment range:0 to+6
3 PressM.C. toconfirm theselection.
SLA (sourcelevel adjustment)
SLA (SourceLevel Adjustment)lets you adjustthe vo-
lume levelof eachsource toprevent radical changes
in volumewhen switchingbetween sources.
! When selectingFM asthe source, youcannot
switch toSLA.
! Settings arebased onthe FMvolume level, which
remains unchanged.
Before adjustingsource levels,comparethe FM
volume levelwith thelevel of thesource youwish
to adjust.
! The AMvolume levelcan alsobe adjusted with
this function.
1 PressM.C. todisplay thesetting mode.
2 TurnM.C. toadjust the sourcevolume.
Adjustment range:+4 to–4
3 PressM.C. toconfirm theselection.
Note
Operation is complete even if the menu is can-
celled before being confirmed.
Initial Settings
1 Press SRC/OFF and hold until the unit
turns off.
2 Press M.C. and hold until the initial set-
ting menu appears in the display.
3 Turn M.C. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
Language (multilanguage)
Menu languagerelated toBluetooth telephone can
be changed.
! Some charactersmay notbe displayed properly.
1 PressM.C. todisplay thesetting mode.
2 TurnM.C. toselect the language.
English—ESPAÑOL
Clock set(setting theclock)
En
20
Section
02
Operating this unit