Filter
Top Products
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.
1 Connection
Use the Bluetooth telephone connection menu.
Refer to Connection menu operation on thispage.
2 Function settings
Use the Bluetooth telephone function menu.
Refer to Phone menu operation onthe next page.
Basic operations
Making a phone call
! Refer toPhone menu operation on the nextpage.
Answering an incoming call
1 When a call is received, press
.
Ending a call
1 Press
.
Rejecting an incoming call
1 When a call is received, pressand hold
.
Answering a call waiting
1 When a call is received, press
.
Switching between callers on hold
1 Press M.C.
Canceling call waiting
1 Press and hold
.
Adjusting the other party’s listening volume
1 Turn LEVER while talking onthe phone.
! When private modeis on, this function is not
available.
Turning private mode on oroff
1 Press BAND/
while talking on the phone.
Switching the information display
1 Press
/DISP while talking on the phone.
Notes
! If private mode is selected on the cellular
phone, hands-free phoning may not be avail-
able.
! The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Using voice recognition
This feature can be used on an iPod equipped
with voice recognition that is connected by
Bluetooth with the source set to iPod or
BT Audio.
% Press and hold M.C. to switch to voice
recognition mode.
Notes
! For details on voice recognition features,
check the manual for the iPod you are using.
! Some commands may not be available on this
unit.
Connection menu operation
Important
! Be sure to park your vehicle in a safe place
and apply the parking brake when performing
this operation.
! Connected devices may not work properly if
more than one Bluetooth device is connected
at a time (e.g. a phone and a separate audio
player are connected simultaneously).
1 Press and hold to display the con-
nection menu.
# You cannot perform this step during a call.
2 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
Device list (connecting or disconnecting a device
from the device list)
! When no device isselected in the device list, this
function is not available.
1 Press M.C. todisplay the setting mode.
2 Turn M.C. to select thename of a device you want
to connect/disconnect.
! Press and hold M.C. to swap betweenthe
Bluetooth device address and the device
name.
3 Press M.C.to connect/disconnect the selected de-
vice.
Once the connection is established, Connected
is displayed.
En
19
Section
02
Using this unit
Using this unit