Filter
Top Products
Installation using the screw holes on the side of the unit
Fastening the unit to the factory radio mounting bracket. (Fig. 5) (Fig. 6)
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fit-
ted), and tighten the screws at 3 or 4 places on each side.
Use either binding screws (5 × 6 mm) or flush surface
screws (5 × 6 mm), depending on the shape of the screw
holes in the bracket.
Fig. 5
Fig. 6
Dashboard or ConsoleFactory radio mounting bracket
If the pawl gets in the
way, bend it down.
Screw
Be sure to use the screws
supplied with this product.