Filter
Top Products
53
Others
Operating with the Head Unit
When in the IP-BUS mode, some operations can be performed with the head unit.
When connected to a Pioneer Multi-Channel AV Master Unit (e.g. AVM-P9000R), refer to
the AV Master Unit Owner’s Manual.
When connected to the “DEX-P9”, refer to the Head Unit’s Manual.
When operating with another head unit, refer to the following Function Compatibility Chart
and Function Mode Switching, and operate with the appropriate buttons.
7 Function Compatibility Chart
Function Reference page Button
Source switching 17 SOURCE, SOURCE/OFF
Disc switching (selection by disc number) —— 1 – 6
Disc switching 23 BAND, 23
(moving ahead one disc number at a time)
Disc switching 23 5/∞
(moving ahead or back one disc number at a time)
Chapter/track advance/return 20 2/3*
1
Fast forward/reverse 22 2/3*
2
*1 Operation is possible when the AUTO (A/M) mode is set to AUTO.
*2 Operation is possible when the AUTO (A/M) mode is set to MANU.
7 Function Mode Switching
When using convenient functions other than those usually used, switch the mode and operate.
Press the FUNCTION button.
Press the button repeatedly until the desired mode is selected.
FUNC1 = FUNC2 = FUNC3 = FUNC4 = AUTO (A/M)
Press the 5 button (press the ∞ button to switch OFF).
Perform AUTO (A/M) operation with the 2/3 button.
Mode Press the 5 button Press the 5 button for 2 seconds
FUNC1 Head unit display switching ———
FUNC2 Pause (see page 24) Random play (see page 38)
FUNC3 Scan play (see page 38) ———
FUNC4 Repeat range switching ———
(See pages 32, 35 and 37)
Mode Press the 2/3 button Press the 2/3 button for 2 seconds
AUTO (A/M) AUTO/MANUAL switching ———
2
1