Filter
Top Products
Memory protect function
In order to avoid accidentally erasing data which have been stored in memory, or to avoid
replacing stored data, it is possible to set up a protect function for the following memory
numbers.
When the protect function is ON, adjustment data storage operations are not accepted.
Note:
• Protect function ON/OFF switching is simultaneously performed for both memories. So, for exam-
ple, if the protect function is switched ON for memory B1, it is switched ON for both base memory
B1 and B2. Also, if the protect function is switched ON for M1, it is switched ON for both custom
memory M1 and M2. However, the protect function does not operate for M3 and LM.
When turning the protect function ON/OFF
• Turning the protect function ON/OFF does not bring up anything on the display.
• When the protect function is turned ON and the user attempts to store new data in that memory, the
“ ” appears to signify that data storage is not possible.
2. Press the RETURN button for two seconds to turn ON the protect
function.
Press the button again for two seconds to cancel the protect function.
1. Recall the memory (refer to page 45).
Specify the memory number directly to recall the memory.
47
ENG/MASTER 96
47
Audio Adjustment <Memory Function>