Pioneer RS-D7R Car Amplifier User Manual


 
62
Specifications
GENERAL
Power Source .......... DC 14.4 V (10.8 to 15.1 V allowable)
Grounding system .......................................... Negative type
Max. Current consumption ............................................ 1 A
Fuse ................................................................................ 4 A
Dimensions ....... 240 (W) mm × 59 (H) mm × 240 (D) mm
Weight ........................................................................ 3.6 kg
DSP/PREAMP
Tone controls (parametric)
Bass frequency ..........63 Hz, 100 Hz, 160 Hz, 250 Hz
Treble frequency ...... 4 kHz, 6.3 kHz, 10 kHz, 16 kHz
Gain .................................................................. ±12 dB
31-band graphic equalizer (L/R independent)
Frequency ............................ 20 Hz to 20 kHz, 1/3 oct.
Gain .................................................... ±12 dB (0.5 dB)
3-band parametric equalizer (L/R independent)
Frequency ............................ 20 Hz to 20 kHz, 1/3 oct.
Gain .................................................... ±12 dB (0.5 dB)
Crossover network (L/R independent)
SUBWOOFER
................... HPF frequency: 20 Hz to 100 Hz, 1/3 oct.
.................... LPF frequency: 40 Hz to 250 Hz, 1/3 oct.
................................. Gain: +10 dB to 24 dB (0.5 dB)
LOW ......... HPF frequency: 25 Hz to 250 Hz, 1/3 oct.
.................. LPF frequency: 250 Hz to 10 kHz, 1/3 oct.
...................................... Gain: 0 dB to 24 dB (0.5 dB)
MID ......... HPF frequency: 160 Hz to 10 kHz, 1/3 oct.
.................... LPF frequency: 2 kHz to 20 kHz, 1/3 oct.
...................................... Gain: 0 dB to 24 dB (0.5 dB)
HIGH
................ HPF frequency: 1.6 kHz to 20 kHz, 1/3 oct.
.................... LPF frequency: 8 kHz to 20 kHz, 1/3 oct.
...................................... Gain: 0 dB to 24 dB (0.5 dB)
Slope
........... PASS, 6, 12, 18, 24, 36, 48, 72 dB/oct.
..............................(PASS: no pass HPF-High channel)
Phase ........................................ NORMAL/REVERSE
Time alignment
(H/M/L ch) ................. 0 cm to 192.5 cm (0.77 cm)
(SW ch) ......................... 0 cm to 385 cm (1.54 cm)
Position adjustment
................... DISTANCE: 0 cm to 192.5 cm (0.77 cm)
.................................... Level: 0 dB to 30 dB (0.5 dB)
Sampling frequency .............................................. 44.1 kHz
Digital input .................................................... Optical input
Analog Output ..................................... RCA output (4 line)
RCA OUTPUT
Frequency responce .............. 10 Hz to 20 kHz, (1, +0 dB)
Max. output level/impedance ..............................4 V/220
Distortion............................... 0.002% (1 kHz, 20 kHz LPF)
Signal-to-noise ratio .................... 115 dB (IHF-A network)
Separation ............. 80 dB (100 Hz to 10 kHz, 20 kHz LPF)
Note:
Specifications and the design are subject to possi-
ble modification without notice due to improve-
ments.
CRD3207
ENG/MASTER 96
62