Filter
Top Products
Planar User’s Manual
4
Connecting Video
1. Turn off your PC and the LCD Monitor before connecting your LCD monitor to the computer.
2. Connect the VGA signal cable to the D-sub VGA connector located at the rear of the monitor.
3. If your PC has a graphic card with a 24-pin DVI connector, you should connect it with the Digital 24-pin DVI
signal cable (optional).
4. Make sure the signal cable heads are securely connected to the VGA ports of your PC and Monitor. Tighten
the connecting screws to ensure a secure connection.
5. Turn on your LCD Monitor and computer.
Connecting the Stereo Speakers
Please refer to the following instructions for connecting the LCD Monitor’s stereo speakers.
1. Connect the 1.5M sound cable to the Lineout of your PC’s audio card.
2. Connect the other end of the 1.5M sound cable to the LCD Monitor’s line-in jack.