Filter
Top Products
11
OPERATION
RADIO OPERATION
• SELECTING BAND
Press BND button (11) to change
between three FM bands and two AM
bands and one LW band. Each band
stores up to six preset stations.
• SELECTING STATION
During radio mode, press TUNE/SKIP
button (13) to increase frequency
or TUNE/SKIP button (14) to
decrease frequency by one step of
channel spacing. Hold the button
longer for fast tuning. The frequency
is updated correspondingly on display.
• SELECTING MEMORY
Press preset memory buttons (15) to
preset stations at tuner mode.
With this system, a total of 30 stations
can be stored in the memory of six
buttons. The stations might be FM1,
FM2, FM3, AM1/MW and AM2/LW
band. The operation is as below:
- Store in Memory
Press and hold desired memory
location button for several seconds.
The current listening station will be
stored into the number button.
- Retrieve a Preset Station
Press any one of the buttons (15) to
retrieve a station which had been
stored in the memory in advance the
chosen number is shown on display.
• AUTO MEMORY STORING &
SCANNING
- Auto Memory Storing
Seeks the six strongest stations in
the pre-selected band automatically
and stores the stations automatically
in preset memories. Initially the tuner
seeks and memories the stations in
local mode until 6 stations are fully
occupied. Otherwise, seeking is
proceeded in distance mode.
- Auto Memory Scanning
Check the stations stored in the
preset memories. Press to retrieve
automatically the current stations
stored in six preset memories and it
will display for several seconds.
Press either the AS/PS button (16)
again or anyone of the memory
buttons to stop the scan operation.
During the preset scan operation,
the channel number flashes on the
display for several seconds.
Preset station scan continuously in
the pre-selected band.
CDC OPERATION
• SELECTING TRACK
During CDC mode, press TUNE/SKIP
button (14) or TUNE/SKIP
button (13) to move to the previous
track or the next track. The track
number shows on the display.
• SELECTING CD
Press CD + button (17) to select next
disc and CD – button (18) to select
previous disc.
• REPEAT THE SAME TRACK
Press RPT button (19) to continuously
repeat the same track on the current
disc. Press it again to continuously
repeat all tracks on the current disc.
Press it the third time to stop
repeating.
• PREVIEW ALL TRACKS
Press SCN button (20) to play the first
several seconds of each track on the
current disc. Press it again to stop
intro and listen to track.
• PLAY ALL TRACKS
Press RND button (21) to play all tracks
on the current CD in random order.
Press it again to cancel the mode.
FM1 FM2 FM3 AM1/MW AM2/LW