Filter
Top Products
5
MOUNTING THE TUNER UNIT
1. Bracket (A)
2. Mounting Bolt (M5 x 5)
3. Bracket (B)
4. Hexagonal Bolt with Washer (M6 x 12)
5. Tapping Screw with Washer (M5 x 12)
6. Spring Washer (M6)
7. Spring Washer (M5)
8. Double Sided Tape
INSTALL THE DISPLAY UNIT
Before install the display unit, please
remove its tail screw and cable parts.
This unit can be properly installed either
from “front” (convertional DIN Front-
mount) or “rear” (DIN Rear-mount
installation, utilizing threaded screw holes
INSTALLATION
at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.
DIN FRONT-MOUNT
Installing the unit
1. Dashboard
2. Holder
After inserting the holder into the
dashboard, select the appropriate tab
according to the thickness of the
dashboard material and bend them
inwards to secure the holder in place.
3. Display Unit
1. Dashboard
2. Nut (M5)
3. Spring Washer
4. Tapping Screw with Washer (M5 x 25)
5. Screw
6. Plain Washer
7. Strap
Be sure to use the strap to secure the
back of the unit in place. The strap
can be bent by hand to the desired
angle.
Step 1
Step 2
1
2
1
2
6
4
5
7
3
8
6
4
6
5
7
8
5
7
3
(Fig. 1)
1
3
2
182
53
(Fig. 2)
1
2
7
5
4
3
6