Filter
Top Products
20
Press
SEARCH
to start searching im-
mediately or to continue searching if
you want to skip a frequency.
During service-search, you can press
HOLD
to pause the searching.
HOLD
appears. Press
▲
or
▼
to move up or
down one step, or press
SEARCH
to
resume searching.
Follow these steps to store service
bank frequencies into channels.
1. Press
MANUAL
.
2. Use the number keys to enter the
channel number (1–1000) where
you want to store the frequency,
then press
MANUAL
.
3. Press
SVC
then
SEARCH
to select
a service bank and begin search-
ing.
4. When the scanner stops on a
transmission, press
HOLD
. The
frequency appears.
5. Press
E
to store the frequency into
the channel.
LIMIT SEARCH
If you do not know a frequency to
store, you can search for transmis-
sions within a range of frequencies
you select, called the
limit search
range
. Then you can store any inter-
esting frequencies you find into chan-
nels.
1. Press
MANUAL
, enter the chan-
nel number where you want to
store a frequency, then press
MANUAL
again. The channel num-
ber appears.
2. Use the number keys and
•
to
enter the frequency that is the
lower limit of the range you want
to search.
3. Press
LIMIT.
4. Use the number keys and
•
to
enter the frequency that is the
upper limit of the range you want
to search.
5. Press
LIMIT
then
SEARCH
. The
scanner begins to search from the
lower limit to the upper limit.
6. When the scanner stops on a
transmission, quickly press either:
•
E
to store the displayed fre-
quency into the channel. The
scanner stores the frequency.
•
▲
or
▼
to stop searching so
you can listen to the transmis-
sion.
HOLD
appears.
To release hold and continue
searching, press
SEARCH
.
Notes:
• To step through the frequencies
while
HOLD
appears, press
▲
or
▼
.
•Press
▲
then
SEARCH
to search
from lowest to highest frequency,
or press
▼
then
SEARCH
to
search from highest to lowest fre-
quency.
20-432.fm Page 20 Friday, July 14, 2000 11:30 AM