Filter
Top Products
49
Function Command
Check a bank’s priority channel number
Note:
Enter a letter instead of the bank num-
ber. Example: “C” for bank 3.
PC n
Set a bank’s priority channel
PC n###
where ### equals the three-
digit channel number
Check if Priority is on
PR
Turn Priority on/off
PRN/PRF
Add a frequency to a channel
PM### ########
where ### equals the three-
digit channel number and
######## equals the fre-
quency
Check if Squelch Monitor is on
QU
Turn Squelch Monitor on/off
QUN/QUF
Check if Priority Monitor is on
RI
Turn Priority Monitor on/off
RIN/RIF
Check scanner modulation setting
RM
Check which banks are active
SB
Select banks for scanning
SB x
where x equals a matching let-
ter equivalent to the bank you
want to scan. For example, to
scan bank 5, type E. Or, to
scan banks 3 and 7, type CG.
Check if Squelch is open
SQ
Check for a frequency in search skip memory
SS##
where ## equals the two-digit
memory number
Enter a frequency in search skip memory
SS########
where ######## equals the
frequency
20-432.fm Page 49 Friday, July 14, 2000 11:30 AM