Filter
Top Products
16
1
SEARCH
¡ 4
ASMS
¢
RANDOM
DISC
DISC
SET
0
TRACK
SET
7 8
9
4 5
6
1 2
3
DISPLAY
HI-LITEPOWER BESTPREVIOUS
MODE CLEARPROGRAMREPEAT
7 8 3
2 3
(HI-LITE scan)
• The operation is available only from the remote control.
This function plays a 10 second portion located 1 minute
from the start of each track on all the discs in the current
play mode.
<Disc scan> Press HI-LITE during either
play or stop mode.
• The changer plays a 10
second portion located 1
minute into the first track of
each CD, starting from the
first CD.
The DISC and SCAN indicator
blinks.
<Track scan> Press HI-LITE twice during
either play or stop mode.
• The changer plays a 10
second portion located 1
minute into each track of
each CD, starting from the
first CD.
The SCAN indicator blinks.
<Program scan> Press HI-LITE during program
mode.
• The changer plays a 10
second portion located 1
minute into each track in the
program.
The SCAN indicator blinks.
<Best selection memory scan>
Press HI-LITE during best
selection memory playback.
• The changer plays a 10
second portion located 1
minute into each track in the
best selection memory.
The SCAN indicator blinks.
Press twice
Press once
Press once
HI-LITE
3
HI-LITE
HI-LITE
HI-LITE
HI-LITE
Press once
<Programming a pause (remote control only)>
(Pause program)
If you press 8 at Step , you can program a pause. When
you press 8, PA appears in the display instead of the disc
number.
• For example, when making a program for recording both
sides of a cassette tape, press 8 to insert a pause after
programming the tracks for one side. After turning the
tape over, press 8 to resume recording.
Notes:
• You cannot program a pause as the first step, nor
program two pauses in a row.
• When you program a pause, it counts as one step and
reduces the total number of tracks you can program.
• To erase a program...
Press 7 twice during playback (or once in stop mode).
You can also erase the program by pressing MODE,
RANDOM, PREVIOUS, or SINGLE LOADER PLAY in
either play or stop mode (or by pressing BEST in stop
mode).
• To cancel a program step
In stop mode, each time you press CLEAR, the last step
in the program is erased.
• If a programmed disc is missing or inserted backwards
during program play, NO DISC appears in the
display, the step is automatically erased, and playback
proceeds to the next step.
• Program contents are stored in memory even when
the power is turned off.
• Press DISPLAY twice to check the number of steps that
have been programmed.
DISC TRACK MIN SEC
PGM
Notes:
• If Step is carried out before the accumulated time is
displayed, the program play starts and the time is not
displayed.
• When UNLOAD is pressed while a program has been
entered, the disc for the 1st program step comes on the
center position and the hood opens.
• The display is not shown if the total time of the program
is 100 minutes or more.
5
4
This Indicates the Number of
Programmed Steps.