Filter
Top Products
16
OPERATION-RADIO TUNER
SELECTING A STATION
Press the DIR
/
Button (SEEK or )
once and the Tuner will rapidly proceed to the
next DIR (UP) or pervious DIR (DOWN)
station.
Press and holding either the DIR
/
but-
ton (SEEK or ) for 1 second will put you into
TUNER MANUAL mode. You can now manually search up or down at a rate of one digit
per click (pressing and holding the DIR
/
button will allow rapid searching).
PRESET BUTTONS
Each Tuner mode—FM1, FM2, and AM—has 10 presets for a total of 30 presets.
NOTE: The following is for the panel of the source unit. See the end steps if using the
optional remote.
To Set a Preset Button (for buttons 1 to 6)
1. Tune the Tuner to the station you wish to program.
2. Press and hold any preset button (1 to 6) for five seconds and it will program that
setting.
To Set a Preset Button (for buttons 7 to 0)
3. Tune the Tuner to the station you wish to program.
4. First, press the T-ACC button, then press and hold preset button
(7 to 0) for five seconds and it will program that setting.
To Set a Preset Button (remote use)
1. Tune the Tuner to the station you wish to program.
2. Press and hold any preset button (1 to 0) for five seconds and it
will program that setting.
7
8
9
0
T-ACC
RFX
9000
MUTE
LO/DX
AS
PUNCH
OPEN
1
Remote
MODE
MENU
VOL
PUSH
DIR
DIR
DISP
123456
7
8
T-ACC
BAND
MENU
ENTER
PUSH
DIR
SCAN RPT RDM ROOT MUTE
T/-10 T/+10
ROOT DIR SONG