Filter
Top Products
12
OPERATION – BASIC
OPERATION – TUNER
SELECTING A BAND
Press the BAND button repeatedly to cycle through FM1, FM2, and AM.
The act of selecting the band automatically enables that band.
TUNER OPTIONS
The bracketed options are alternate options.
• AMERICAS [EUR/AUST]
• P. PLAY [EJMUTE]
Selecting Tuner Options
See SETUP OPTIONS to change tuner options.
Local / DX Selection
Select between LOCAL and DX tuner sensitivity by pressing the LO/DX (8)
button. LOCAL sets the sensitivity for city conditions where there are several
strong radio stations. DX sets the sensitivity of the tuner for rural conditions where
there are weak radio stations.
SELECTING A STATION
Press the DIR / Button once and the Tuner will rapidly proceed to the
next DIR (UP) or pervious DIR (DOWN) station.
Press and holding either the DIR / button for 1 second will put you into
TUNER MANUAL mode.You can now manually search up or down at a rate of
one digit per click (pressing and holding the DIR / button will allow
rapid searching).
PUNCH
The Punch button enables the bass and treble response of the audio output to be
boosted for all listening levels.
1. Press the PUNCH (0) button to enable the Punch feature.
2. Press the PUNCH (0) button again to disable the Punch feature.
NOTE:The panel will display "Punch" when the Punch feature is on.
PANEL DISPLAY
Tuner Mode:
The panel will display the band, FM1, FM2 or AM1, and the station frequency.
CD Modes
While playing a disc the panel will display the track number and the time played.