Filter
Top Products
TROUBLESHOOTING – OPTIONAL CD CHANGER
SYMPTOM DIAGNOSIS REMEDY
Error 3
(Loading Error)
Tray loading has not completed
after 5 seconds
Press Eject, pull out the magazine,and try again.
Loading mechanism and motor (or
driving circuit) is defective
Repair mechanism and loading motor (or driving
circuit)
Error 4
(Unloading
Error)
Tray unloading has not completed
after 5 seconds
Press Eject, pullout the magazine,and try again.
Unloading mechanism and motor
(or driving circuit) is defective
Have a service center repair mechanism and
loading motor (or driving circuit)
Error 7
(Focus Error)
The laser pick-up is defective
Repair the laser pick-up
Disc is warped or damaged
Put in a new disc
Error 5
(Elevator Error)
Magazine tray is jammed
Repair CD changer mechanism.
Disc is warped or damaged Put in a new discError 9
(TOC Error)
The laser pick-up is defective
Have a service center repair the laser pick-up
NO CD
(No Disc Error)
Magazine is empty or not installed
in the unit
Check the magazine and insert discs
NO CONN
(Communication
Error)
8-pin DIN cable is
disconnected from the CDX
mechanism or source unit
Check the connection of 8-pin DIN cable between
the CDX and unit
CD Changer
does not operate
CDX cable is intermittent or
severely damaged
Check connections and repair or replace CDX
cable as necessary
CDX cable is disconnected from
the Source Unit or CD Changer
Check connections at the Source unit and CD
Changer and repair wiring as necessary
Disc is jammed
in the CD
Changer
Disc load/unload problem Try Ejecting magazine.If CD Changer still does not
operate,see your Local Authorized Rockford
Fosgate Dealer
21