Samson XP112A Car Speaker User Manual


 
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. This apparatus shall not be exposed to dripping
or splashing liquid and no object lled with
liquid, such as a vase, should be placed on the
apparatus.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings.
Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatuses
(including ampliers) that produce heat.
9. Only use attachments/accessories specied by
the manufacturer.
10. Unplug this apparatus during lightning storms or
when not in use for long periods of time.
11. Do not override the intended purpose of the po-
larized or grounding-type plug. A polarized plug
has two blades, with one wider than the other. A
grounding-type plug has two blades and a third
grounding prong. The wide blade, or third prong,
is provided for your safety. If the provided plug
does not t your outlet, consult an electrician to
replace the obsolete outlet.
12. Protect the power cord from being walked on or
pinched, particularly at the prongs, convenience
receptacles, the point where they exit from the
apparatus.
13. Use only with the cart stand, tripod bracket, or
table specied by the manufacture, or sold with
the apparatus. When a cart is used, utilize caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
14. Refer all servicing to qualied service personnel.
Servicing is required if the apparatus has been
damaged in any way, such as power-supply cord
or plug breakage, damage due to liquid or objects
falling onto the apparatus, exposure to rain or
moisture, or if the apparatus does not operate
normally, or has been dropped.
15. POWER ON/OFF SWITCH: For products with a
power switch, the power switch DOES NOT break
the connection from the mains.
16. MAINS DISCONNECT: The plug should remain
readily operable. For rack-mount or installation
where plug is not accessible, an all-pole mains
switch with a contact separation of at least 3 mm
in each pole shall be incorporated into the electri-
cal installation of the rack or building.
17. FOR UNITS EQUIPPED WITH EXTERNALLY ACCES-
SIBLE FUSE RECEPTACLE: Replace fuse with same
type and rating only.
18. MULTIPLE-INPUT VOLTAGE: This equipment may
require the use of a dierent line cord, attach-
ment plug, or both, depending on the available
power source at installation. Connect this equip-
ment only to the power source indicated on the
equipment rear panel. To reduce the risk of re or
electric shock, refer servicing to qualied service
personnel or equivalent.
Important Safety Information
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that
may be of sucient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance instructions in the literature accompanying the appli-
ance.
AVIS
RISQUE DE CHOC ÉLECTRONIQUE -
NE PAS OUVRIR
3Expedition XP112/XP115