Sanyo PID-42AS1 Car Video System User Manual


 
17
SPECIFICATIONS/HELPFUL HINTS
Specication
Common specication
Power source: 100 ~ 240V 50Hz/60Hz
Colour system: PAL/NTSC/NTSC4.43/SECAM
AV terminal
AV1: Scart CENELEC Standard
Input: Composite video, RGB (5V RGB with 5V sync to pin 14)
and audio-L/R
Output: composite video from AV3 and audio L/R
AV2: BNC
Input: RGB, H and V/Y, Pb, Pr and audio L/R
Output: RGB, H and V/Y, Pb, Pr
AV3: BNC
Input: Composite video
Output: Composite video
Audio Monitor Out: CINCH L/R
Audio Speaker Out: 2 x 6W
DVI
Input: DVI-D GROUP Standard
PC
Input: Mini D-SUB 15 PIN and Audio 3.5mm Jack
Serial Port: RS232C: Input/Output
Helpful hints
NO PICTURE NO SOUND
Check if monitor is plugged in.
Check monitor is not in standby mode.
POOR PICTURE
Adjust BRIGHTNESS/CONTRAST levels (too low).
NO COLOUR, PICTURE OK
Adjust COLOUR control.
Check lead connections.
Does the signal input have colour.
REMOTE CONTROL DOES NOT WORK
Check batteries are inserted correctly.
Check condition of batteries.
Check to see if remote control inhibit is set ON.
PICTURE OK, NO SOUND
Check external speakers are connected correctly.
Check lead connections to external equipment.
Check volume turned down or mute selected.
Model name Contrast Ratio
Screen
(inches/cm)
(viewing measured
diagonally)
Display Native
Resolution
Veiwing angles
Dimension
(W x H x D)
Weight (kg)
PID-42AE1
1000:1 42"/106.7 cm 1920 x 1080 H: 178°, V: 178° 1010.3 x 603.3 x 100 mm 18
PID-42AS1
The specications are subject to change without notice.
LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels
(0.01% or less) may be ineffective by the characteristics of the LCD panels.
GB GB