Sanyo PID-42AS1 Car Video System User Manual


 
21
RS232C COMMAND TABLES
Time Read Command Table
Status read command Item
CR PANELH
Status of accumulated lifetime of panel.
(The same as CR_LAMPH Command)
CR MONH
Status of accumulated lifetime of monitor.
(The same as CR_PROJH Command)
UK5 Read Command Table (Basic Command)
Command Item Note
CR0 Power On, Standby, power error,
CR1 Input Mode AV1, AV2, . . . , DVI, PC
CR WIDE Wide mode Auto, Normal, Full, . . .
CR PICTURE Picture mode Dynamic, Standard, . . .
CR SIGNAL Signal existence Signal/No signal
CR CHILD Child lock On/Off
CR PSAVE Power save On/Off
CRTM Panel usage time –––
CR RMC RC inhibition On/Off
CR MDL Model number Model number
Error code Table
Error code Note
?
• Receiving the data that cannot be decoded.
• The wrong indication of parameter.
(Wrong gured number, or wrong word is included)
000 Normal receiving. (no error)
102
If the command of out of range is directly entered
valuable parameter.
103
No matching with Hardware.
(Command for optional function which is not
equipped)
201
If the command of “Out of range” is entered by
inclement or decrements by numeric value.
301
While capturing the picture, no execution. Wait and
transmit command again.
402
While PIN code is in operation, no execution.
Wait and transmit command again.
101 The errors not including above.
Sound control Read Command Table
Status read command Item
CR VOLUME Status of volume value.
CR MUTE Status of MUTE.
Other Read Command Table
Status read command Item
CR STATUS Status of the operation of the monitor.
CR SIGNAL Status of with or without signal.
CR FREEZE Status of Freeze setting.
CR FANLOCK Statuses of fan lock error.
CR TEMP Status of current temperature value.
Setting Read Command Table
Status read command Item
CR LANG Status of Language selection.
CR P-MANE Status of Power management setting.
CR TILE Status of Tile mode ON/OFF setting.
CR TILE-HSETS
Status of Tile mode, the number of
Horizontal array.
CR TILE-VSETS
Status of Tile mode, the number of
Vertical array.
CR TILE-HLOCAT
Status of Tile mode, the number of
Horizontal allocation.
CR TILE-VLOCAT
Status of Tile mode the number of Verti-
cal allocation.
CR TILE-BZLHADJ
Status of Tile mode, the width of bezel
(Horizontal).
CR TILE-BZLVADJ
Status of Tile mode, the width of bezel
(Vertical).
CR ONPROG Status of On Program information.
CR WINTERMODE Status of Winter mode Information.
CR PANELPROTECT Statuses of Panel protect Information.
CR LEDLIGHT Status of LED light Information.
CR AVAUTOSHUT Status of AV auto shut OFF Information.
CR CHILDLOCK Statuses of Child lock Information.
CR RCINHIBITION Status of RC Inhibit Information.
GB GB