Sennheiser ADN-W AM Car Stereo System User Manual


 
Switching the antenna module on/off
ADN-W AM|11
Switching the antenna module on/off
The antenna module is connected to the ADN CU1 central unit and
automatically switches on when the central unit is switched on.
To switch the antenna module on:
̈ Set the on/off switch of the ADN CU1 central unit to position “I”.
The central unit switches on and its display panel lights up. The
connected ADN-W AM antenna module is also switched on.
To switch the antenna module off:
̈ Disconnect the system cable from the input socket of the
antenna module.
Or:
̈ Set the on/off switch of the ADN CU1 central unit to position “0”.
The antenna module is switched off. The wireless conference units
try to reconnect to the antenna module and automatically switch
off after 5 minutes if no switched-on antenna module can be
found.
ADN CU1
PORT I/PORT II
1 2
ADN PS
PORT I/PORT II PORT I/PORT II
1 2 1 2
ADN PS
OUT
IN
20
...
OUT
IN
20
...
OUT
IN
20
...
1
ADN CU1
ESC
ADN-W AM
ON
ADN CU1
ON
1
4
1