Filter
Top Products
54
ƺ
Connecting the loudspeakers
When installing a system with up to eight loudspeakers, make sure that
the individual loudspeakers have an impedance from 4 to 8 ohms.
The peak pulse power must be 30 W minimum.
When using more than one loudspeaker, make sure that the individual
loudspeakers have the same polarity (+/–).
Danger of short circuit!
Never connect the loudspeaker cables to the ground and never allow the
cables to come into contact with another cable or metal casing parts.
During operation, the ends of the loudspeaker cables must never come
into contact. This can cause a short circuit and may damage your speaker.
Ǡ Connect a loudspeaker cable to each loudspeaker.
Ǡ Connect each loudspeaker separately to the amplifer. Do not connect in
“daisy-chain” configuration.
Ǡ Connect two loudspeakers to each loudspeaker output ƺ.