Filter
Top Products
57
µ
Ƽ
ƻ
Adapting the system sensitvity to the connected receivers
Ǡ Turn the line input sensitivity control (LINE IN) µ clockwise as far as
possible.
Ǡ Adjust the output level on the EM 500 receiver as described in the
receiver’s instruction manual.
Installing a system including two transmitters and an
audio device
You can also connect an additional receiver and an external audio device
(e.g. VCR) to the two line inputs (LINE IN) ƻ of the EMP 2015. With
such a system, the signals of two speakers speaking simultaneously and the
signals of a VCR or similar are then reproduced by loudspeakers in the
room. (In addition, you can connect sound recording devices to the two line
outputs (LINE OUT) Ƽ of this system.)
To install this system, please proceed as described in the chapters “Installing
a system with several transmitters (team teaching)” and “Connecting external
audio devices”.