Filter
Top Products
21
Wide Mode
Auto Selection
If you set “WSS” and “4:3 mode” in the Setup menu,
the optimum WIDE mode is automatically chosen for
every broadcast containing the WSS information.
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup
menu to “On”. (See page 13.)
“4:3 mode” menu
To set the type of the wide screen, select “Panorama”
or “Normal” in the 4:3 mode menu. (See page 14.)
4:3 mode set to “Panorama” 4:3 mode set to “Normal”
NOTE
•
If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is enabled.
Manual Selection
You can select different picture sizes that account for
the kind of each picture.
1
Press WIDE.
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
2
Press WIDE or
a
/
b
while the WIDE MODE
menu displays on the screen.
• As you toggle down the options, each mode is
immediately refl ected on the TV.
Selected item Description
Normal
For 4:3 “standard” pictures. A side bar
appears on each side.
Zoom14:9
For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also
see bars on the top and bottom with some
programmes.
Panorama
In this mode the picture is progressively
stretched toward each side of the screen.
Full
For 16:9 squeeze pictures.
Cinema16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Cinema14:9
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Underscan
Display with an Underscan image only
when receiving a 720p/1080i/1080p signal.
Display with the High-Defi nition image
adjusted optimally. Noise may appear
on the edge of the screen with some
programmes.
NOTE
• Some picture size may not be displayable depending on the
input signal.
EPG (Continued)
Viewing the reminder schedule list
1
Press EPG.
2
Press Y
to display the reminder schedule list.
3
Press
a
/
b
to display next or previous screen.
4
Press MENU or EPG to exit.
Cancelling the reminder timer setting
1
Press EPG.
2
Press Y
to display the reminder schedule list.
3
Press
a
/
b
to select a programme you want
to cancel.
4
Press R
to delete a programme from reminder list.
5
Press MENU or EPG to exit.
Picture and still image
You can freeze a motion picture on the Display.
1
Press FREEZE.
• A still image displays.
2
Press FREEZE or RETURN again to exit still
image.
NOTE
• The still image automatically goes out after 30 minutes.
• FREEZE doesn’t function for PC input (all resolution).
LC32L400X_EN.indb 21LC32L400X_EN.indb 21 7/8/10 6:45:23 PM7/8/10 6:45:23 PM