Sharp LC-32PD5X Car Video System User Manual


 
11
Part names
TV (Rear)
RS-232C terminal
MONITOR OUTPUT
terminals
INPUT 2 terminals
INPUT 1 terminals
Antenna input terminal
(ANALOGUE)
AC INPUT terminal
SERVICE ONLY terminal***
* Press RESET if the ANALOGUE TV cannot return to its original state after performing various operations.
This will reset the TV as shown below.
INPUT 3 (HDMI)
terminals
SYSTEM RESET**
DIGITAL AUDIO OUTPUT terminal
(To optical digital input of external audio devices)
Antenna input terminal
(DTV)
RESET*
• “AV MODE” resets to “USER”.
• TV channel resets to channel 1.
• Sound volume is initialised.
• Image position is initialised.
• Still image mode deactivates.
• Teletext mode resets to normal.
• “Audio Only” setting resets to “Off”.
** Press SYSTEM RESET if the TV does not operate after starting up.
*** Usually do not connect anything to this terminal as it is reserved only for service personnel.
NOTE
• Pressing RESET will not work if the TV is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and password. See page 36 for resetting the password. See page 53 for
initialising to the factory preset values in case you forget your password.
• Pressing RESET will not reset the DTV settings.
PD5X_en_a.indd 11PD5X_en_a.indd 11 2006/12/27 15:12:152006/12/27 15:12:15