Sharp LC-32PD5X Car Video System User Manual


 
Selected item
Off
On
On (Display)
Description
The brightness is fi xed at the value set in
“Backlight” (See page 25).
Automatically adjusts
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
24
Basic adjustment settings (Analogue/Digital)
AV MODE selection
AV MODE gives you six viewing options to choose
from to best match the system environment, which
can vary due to factors like room-brightness, type of
programme watched or the type of image input from
external equipment.
Using AV MODE on the remote control unit
OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
Using OPC on the remote control unit
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
Press OPC to switch the OPC function on and off.
Using OPC on the menu screen
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Picture”.
2
Press
a
/
b
to select “OPC”, and then press
ENTER.
3
Press
a
/
b
to select the desired item, and
then press ENTER.
4
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for ANALOGUE TV
input and DYNAMIC for INPUT1.)
AV MODE: STANDARD
AV MODE: MOVIE
AV MODE: DYNAMIC
AV MODE: USER
AV MODE: GAME
Selected item
STANDARD
MOVIE
GAME
USER
DYNAMIC
Description
For a highly defi ned image in a normally
bright room
For a movie
Lowers image brightness for easier
viewing.
Allows the user to customise settings as
desired. You can set the mode for each
input source.
For a clear-cut image emphasising high
contrast for sports viewing
Press AV MODE.
• Present AV MODE displays.
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
1
2
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Picture” or “Audio”.
2
Press
a
/
b
to select “AV Mode”, and then
press ENTER.
3
Press
a
/
b
/
c
/
d
to select the desired item,
and then press ENTER.
4
Using AV Mode on the menu screen
PD5X_en_d.indd 24PD5X_en_d.indd 24 2006/12/22 14:30:022006/12/22 14:30:02