Sharp LC-39LE155X Car Satellite TV System User Manual


 
9
Programme setup (Continued)
Analogue setting
You can reconfi gure the TV channel settings automatically
or manually using Auto search, Manual adjust or
Programme edit.
H
Auto search
You can also automatically search by performing the
procedure below. This is the same function as programme
auto search in auto installation.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “ ” (Programme setup).
3
Press
a
/
b
to select “Analogue setting”, and then
press ENTER. If you have already set the password,
enter it here.
• See page 12 for setting a password.
4
Press
a
/
b
to select “Auto search”, and then press
ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
H
Manual adjust
You can set some channel items manually.
1
Repeat steps 1 to 3 in Auto search.
2
Press
a
/
b
t
o select “Manual adjust”, and then press
ENTER.
3
Press
a
/
b
to select your desired item, and then press
c
/
d
to adjust the settings.
Item Description
Storage to
[1~99]
Save programme to your desired channel
number. Press R to save.
Sound
system
Select the optimum sound system (Broadcasting
system) to receive.
(B/G, D/K, I, M)
Colour
system
Select the optimum colour system to receive.
(PAL, SECAM, NTSC)
Current CH
Select the channel you want to edit.
Selected channel will be automatically
refl ected in the background.
Search
Start searching from current channel.
Instead of pressing
c
/
d
to adjust the
frequency, you can set by directly entering the
frequency number of the channel with
0 — 9.
Press R to save.
Fine-tune
Tune the frequency of the stored channel to your
desired position.
Adjust while checking the background picture
as a reference.
Press R to save.
NOTE
• The frequency shown below the On-Screen Display shows the real-
time frequency of the displayed channel.
H
Programme edit
Use this menu to set up a channel individually.
1
Repeat steps 1 to 3 in Auto search.
2
Press
a
/
b
to select “Programme edit”, and then
press ENTER.
3
Press
a
/
b
to select the channel you want to edit, and
then press 1 to 5 on the remote control if necessary or
press RETURN to exit.
• As you toggle down the channels, each channel is
immediately refl ected in the background when you press
ENTER.
1
(
Erase programme)
Channels can be erased individually.
Press 1 to erase the selected channel.
2
(Label)
You can change channel names individually.
Maximum 5 alphanumerics can be input.
Press 2 to start labelling.
Press
a
/
b
/
c
/
d
to select a character, and then
press
2
again or ENTER to save.
3
(Sort)
Channel positions can be sorted freely.
Press 3 to select the channel you want to move.
Press
a
/
b
to move it to the desired position, and
then press
3 again or ENTER
to save
.
4
(
Skip)
Channels with “Skip” set to “On” are passed over
when using CH
r
/
s
even if selected while watching
the image from the TV.
Press 4 to skip the selected channel.
Press 4 again to cancel the skip.
5
(Lock)
You can block the viewing of any selected channel.
Password must be set fi rst to allow “
” to function.
• See page 12 for setting a password.
Press 5 to lock the selected channel.
Press 5 again to unlock the locked channel.
LC-32_39LE155X_EN_G121.indd 9LC-32_39LE155X_EN_G121.indd 9 12/10/2013 11:20:55 AM12/10/2013 11:20:55 AM