Filter
Top Products
16
Setup menu (Continued)
Quick start
You can reduce the TV’s start-up time after turning on
the power with the remote control unit.
Selected item Description
On
The TV quickly starts up from standby,
more of power consumption is required
during standby.
Off
Power consumption is less than 1W.
Text language
Select from among 5 kinds of language: West Europe,
East Europe, Cyrillic, Arabic and Farsi.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
Digital setup
Selecting the language
Set up to two preferred multi audio languages to display
if the audio languages are available.
1 Press MENU and the MENU screen displays.
2 Press c/d to select “ ” (Setup).
3 Press a/b to select “Digital setup”, and then
press ENTER.
4 Press a/b to select “Digital audio language”, and
then press ENTER.
5 Press a/b to select “1st language” or “2nd
language”.
6 Press c/d to select the desired language.
NOTE
• If audio for the selected languages is not included in a
received broadcast, audio will not be output for that language.
Displaying subtitles for the hearing impaired
You can display subtitles for the hearing impaired in
the Teletext broadcast if the subtitle languages are
available.
1 Press MENU and the MENU screen displays.
2 Press c/d to select “ ” (Setup).
3 Press a/b to select “Digital setup”, and then
press ENTER.
4 Press a/b to select “Subtitle”, and then press
ENTER.
5 Press a/b to select “1st language” or “2nd
language”.
6 Press c/d to select the desired language.
NOTE
• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.
Switching subtitle languages (DVB Subtitle)
Each time you press [ on the remote control, the
subtitle switches when the broadcast contains subtitle
information.
Set “Hearing impaired” to “On”
(Hearing impaired) 1st language
2nd language
Off
ssssssss
Set “Hearing impaired” to “Off”
1st language 2nd language
(Hearing impaired)
Off
ssss
NOTE
• This function is valid only if broadcaster is transmitting
multilingual subtittles.
Time zone
This function enables you to select your local time zone.
1 Press MENU and the MENU screen displays.
2 Press c/d to select “ ” (Setup).
3 Press a/b to select “Digital setup”, and then
press ENTER.
4 Press a/b to select “Time zone”, and then press
ENTER.
5 Press c/d to select the desired time zone.
NOTE
• This function lets you select the right time zone in case the
time displayed in the EPG does not match the local time of
your area.
Identification
You can check the current version of the software on the
screen.
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as “Picture”,
“Audio” and “Programme setup” will be reset to the factory
preset values.
LC60LE650X_EN_book.indb 16LC60LE650X_EN_book.indb 16 7/18/2013 8:52:21 AM7/18/2013 8:52:21 AM