Sharp PN-V602 Car Video System User Manual


  Open as PDF
of 60
 
16
E
Binding Cables
The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamps.
Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables.
: Cable clamp attachment
Cable clamp
Cable
Cable clamp
attachment
Removing the Handles
The handles can be removed.
The removed handles can be attached on the side.
1.Removethehandlescrewsandremovethehandlesand
handle spacers.
2.Passthehandlescrewsthroughthehandlesandhandle
spacers in order and secure.
Caution
• Thehandles,handlescrewsandhandlespacersarefor
thismonitor.Donotusethemforanyotherdevices.
• Whenattachingthehandles,alwaysusethismonitor’s
handles, handle spacers, and handle screws.
• Besurethehandlesareattachedsecurely.
TIPS
• Tolowertheheightofthehandles,attachthehandleswith
the handle spacers removed. To attach the handles with
the handle spacers removed, secure the handles with the
includedhandlescrews(short).
Handle
Handle screws
Handle spacers
Handle spacers
Afxing the Protection Covers
Afterinstallingthemonitor,afxtheprotectioncovers
(4pieces)asnecessary.
Protection cover
Protection cover
 previous next