Filter
Top Products
20
Channel setting
Enables individual channel setting.
1 Press
MENU
to call MENU
screen.
2 Press
CH
/
CH
to
select “CH-SETTING”.
3 Press / to
display CH-SETTING menu.
4 Press
CH
/
CH
to
select desired item.
5 Each time you press / , setting for
individual items changes as follows:
• POSITION:
The channel position changes to the next higher or lower number.
• COLOUR:
• SOUND:
• SKIP: ON
OFF
Channel numbers with a “
” mark on the left are set to SKIP. To turn
off SKIP, press the number buttons to select the desired channel and
then set SKIP to “OFF”.
• FINE: The frequency changes to allow fine tuning.
• NICAM: ON
OFF
Select “ON” to receive NICAM stereo or bilingual sound signals. (See
33
for sound mode selection.) Select “OFF” to receive NICAM
mono signals.
• A2: ON
OFF
Select “ON” to receive A2 stereo or bilingual sound signals. (See
34
for sound mode selection.) Select “OFF” to receive mono
signals.
• Switching COLOUR system:
Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the received
signal system and changes the reception system of the TV set. When the picture is not stable, switching
to an appropriate system may improve the picture quality.
• In a weak reception area, or under bad reception conditions, you can change the frequency by Fine
Tuning.
• When using Fine Tuning (FINE), the channel number changes from green to yellow.
• To return the channel to its original frequency setting, follow the manual channel tuning procedure. See
18
.
6 Press
MENU
until normal
screen appears.
AUTO PAL
N443
SECAM
N358
Settings and adjustments
B/G I
D/K
M
CH
CH
MENU
M
ENU
PICTURE
SOUND
FEATURE
TI
M
ER
CH–SETTING
2
1
MON
A2 ON
B
G
ING
POS IT IO
CH–SETT
NCH7
COLOUR A
SOUND
SKIP OFF
UTO
FINE 68.25
M
Hz
NICA
AV
ING
POS IT IO
CH–SETT
N1
COLOUR AUTO
AUTO PAL
N443
SECAM
N358
• When you select AV1, AV2 or AV3 for the channel position, the CH-
SETTING menu changes as shown above and the colour mode
changes in the following order:
03.7.30, 9:01 AMPage 20