Filter
Top Products
21
Picture adjustment
1 Press
MENU
to call MENU
screen.
2 Press
CH
/
CH
to
select “PICTURE”.
6 Repeat steps 4 and 5 above to adjust other items.
7 Press
MENU
until normal screen appears.
• When
NORMAL
is pressed while the PICTURE menu is displayed, the
setting for the selected item is reset to the standard (factory setting)
position.
• When
NORMAL
is pressed while the MENU screen is displayed and
“PICTURE” is selected, all the settings for the PICTURE items are
reset to the standard (factory setting) position.
3 Press / to
display PICTURE menu.
4 Press
CH
/
CH
to
select adjustment items.
5 Adjust using /
.
The following table lists the adjustment items shown in the PICTURE menu and how they change as you
press / .
*-1: TINT can only be selected and adjusted when receiving an NTSC signal.
*-2: Picture Noise Reduction
Noise might be generated on images when playing deteriorated video tapes or when receiving broadcasts with relatively
weak signals. In these cases, set PICTURE NR to “LOW, MID or HIGH” to reduce the noise. However, when receiving
good images without noise, you can get better image quality by turning OFF this feature.
CH
CH
MENU
NORMAL
M
ENU
PICTURE
SOUND
FEATURE
TI
M
ER
CH–SETTING
(STANDARD
CONTRAS
PICTURE
T50
)
COLOUR 0
BRIGHTNESS 0
TINT
SHARPNESS 0
PICTURE NR LO
W
W
HITE TE
M
P0
R
(STANDARD
CONTRAS
PICTURE
T30
)
COLOU 0
B0
PICTURE NR
W
HITE TE
M
P0
CH :SELECT :ADJUST
M
ENU:RETURN
CONTRAST
Selected item Press Press
COLOUR
BRIGHTNESS
TINT -1
SHARPNESS
PICTURE NR -2
To decrease
contrast
For less colour
intensity
For less
brightness
To move tint toward
purple
For less
sharpness
To increase
contrast
For more colour
intensity
For more
brightness
To move tint toward
green
For more
sharpness
(See note below)
WHITE TEMP To more reddish
background
To more bluish
background
OFF LOW
MID
HIGH
Adjustable individually for each AV mode
03.7.30, 9:02 AMPage 21