Sharp SX66NF100 Car Satellite TV System User Manual


 
40
Connections
When connecting the TV to a DVD player via the COMPONENT IN terminals, the video and audio from
the DVD player cannot be output through the AUDIO/VIDEO OUT terminals on the TV.
Please refer to the operation manual of your DVD player for more information.
Be sure to fully insert the plugs of the connecting cables into the terminals on the TV set and video
equipment. Failure to do so may result in noise.
Before connecting the cables, turn off the power of the TV set and video equipment.
Always remove the cables from the terminals by the plugs and not the cables themselves.
Connecting to a DVD player
The DVD input terminals (COMPONENT IN) on the rear of the TV can be used to input
high-quality images from a DVD player.
Watching DVD playback
1 Press
TV/VIDEO
to select
“COMPONENT”, DVD input
screen.
Connecting the video terminals
DVD input terminals DVD player
Y Y or Y/Y
PB(CB)PB(CB) or B-Y/Pb
PR(CR)PR(CR) or R-Y/Pr
COMPONENT IN
2 Turn on the DVD player and
begin playback.
COMPONENT
(SX76NF100)
DVD input terminals
To colour-difference
(component video)
out terminals
Green: To Y
Blue: To P
B
(C
B
)
Red: To P
R
(C
R
)
Red: To AUDIO IN (R)
White: To AUDIO IN (L)
To audio out
(L/R) terminals
DVD player
TV/VIDEO
The COMPONENT IN terminals support
progressive video signal input for playback on
the screen.
03.7.30, 9:06 AMPage 40