Filter
Top Products
11
SIR-ECL2nt Installation Guide
Activating Your SIRIUS Subscription
You must activate SIR-ECL2nt before
you can start to receive the SIRIUS
Satellite Radio service and the SIRIUS Traf-
c service. Each is a separate service, and
each needs to be activated individually.
In order to activate your radio and trafc
subscriptions, you will need the two SIRIUS
IDs (SIDs) – one for the SIRIUS Satel-
lite Radio service and one for the SIRIUS
Trafc service – which uniquely identify
your SIR-ECL2nt tuner. The SIDs may be
found on sticker located on the bottom of the
SIR-ECL2nt packaging or on the bottom of
the unit itself. The label will have printed on
it two 12-digit SID numbers. The rst will be
the Data SID for the SIRIUS Trafc service,
for example, “Data SID: 123456789012”.
The second is the Audio SID for the SIRIUS
Radio service, for example, “Audio SID:
987654321098”.
Note: You will need the Data SID for the
SIRIUS Trafc service from the label on the
bottom of the unit or from the original
packaging, the AVN source unit does not
diplay this number. The Audio SID can be
displayed by the unit.
Note: It is possible to activate only the
audio or the trafc service, just use the
appropriate SID. When you have located
both SIDs, write them down in the space
provided on page 16 of this manual.
1. Make sure that the SIR-ECL2nt is
properly connected and that its
antenna is oriented to receive the
SIRIUS satellite signal.
2. Turn on the ECLIPSE source unit.
3. Select SIRIUS as the source:
AVN source unit: Press the “SIRIUS”
button (located on the touch screen)
to select SIRIUS as the source.
Note: If this is the rst time
selecting SIRIUS as a source, the
display may show the text
“UPDATING” - which means the
SIR-ECL2nt is receiving important
channel or category updates.
Note: Don’t push any buttons or
perform any operations until
updating has been completed.
Once updated and the SIRIUS
channels are received, the display
will change to Channel 184 the
SIRIUS Satellite Radio’s Preview
Channel (the display will show
“CH184” and “CALL 888-539-
SIRIUS”). At this time you should
also be able to hear the audio from
the Preview Channel.
4. To display the SIRIUS Audio ID:
AVN6610: Press “MENU” then select
“INFO” then “SIRIUS ID”, or tune to chan-
nel “0” and press “FUNC”, “TITLE”.
5. The SIRIUS ID is a 12-digit number.
Write down the SIRIUS ID (SID) in
the location provided on page 16 for future
reference.