Sirius Satellite Radio Stiletto Vechicle Kit Satellite Radio Car Satellite Radio System User Manual


 
[ Installation ]
38
Adhesive Adhesive
Route the antenna cable to your SIRIUS radio. Use the included self adhesive cable
guides (if necessary) to hold the antenna wire in place until it reaches the weather
stripping or moulding at the edge of the window. Take advantage of any existing cable
channels or wiring conduits and route the cable around the passenger compartment to
the vehicle dock. Take care not pull the cable across sharp edges that could damage it,
and keep it away from areas where it might entangle feet. Coil and secure any excess
antenna cable in a location where it can be hidden and secured.
Plug the FM Extender Cable into the FM OUT connector of your Stiletto vehicle dock
(Refer to Figure 24 on page 36.)
This completes the installation of the FM Extender Cable.
To assign additional FM channels as FM presets in your Stiletto:
Press the
FM
FM button on the left side of the vehicle dock or press the FM button
on the remote control.
Use the Media Dial or the buttons on the remote control to select an FM channel.
Press and hold the preset number (0—9) in which you want to store the selected FM
channel. Repeat steps 2 and 3 to assign additional FM presets.
Press the Select button to exit and transmit on the selected FM channel, or press the
FM
FM button to simply exit.
If you’re not sure which FM channels are not broadcasting in your home or travel cities, you
can also go to http://sirius.com/fmchannel and search for a suggested FM channel based
on your zip code.
7.
8.
1.
2.
3.
4.
Figure 28Figure 28