– 8 –
SECTION 3
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
3-1. LOADING PANEL
3-2. GLASS ASSY
1 Turn ON the power, and press the EJECT button to open the
tray.
2 Remove the loading panel in the arrow direction.
3 Press the EJECT button to close the tray.
• If the power cannot be turned ON, refer to “Opening the Disc
Tray When the Power is OFF” of “Service Note”, and open the
tray.
Power button
Loading panel
Eject butto
n
1
Screw (PTP2.6x6)
2
Bracket (shaft)
3
4
4
(Bottom side)