Filter
Top Products
Getting Started
11
Getting Started
Cable System and
VHF/UHF Antenna
System
If you want to watch both antenna (over-the-air) and cable broadcast signals,
you’ll need to use an optional A-B RF switch (not supplied), as shown
below.
Use the A-B selector to switch between the
over-the-air signals and the cable signals. Then
set the
Cable setting in the Setup settings to On
or
Off, as described on page 31.
A
B
A
Cable
Antenna
A/B
RF Switch
Rear of TV
VHF/UHF input