Filter
Top Products
Introducing MENU Function
31
Introducing MENU Function
2 If you selected Set in step 1, press V/v/B/b to set the day(s), hour,
minute, AM/PM, duration, channel number (VHF/UHF, CATV or
Digital), and volume.
When Digital is selected, the last digital channel you viewed will
automatically show when the TV is turned on.
3 Press MENU to exit Settings.
To return to the Timer Settings after programming the Timer or Current Time,
press
B.
Timer will be set to Off when:
- Auto Program for analog channels is executed.
- the AC power cord is disconnected and then reconnected to turn the TV on
and the Current Time is displayed as --:-- --.
Current Time Select to set the current time (day, hour, minute, and AM/PM).
1 Press to select Current Time.
2 Press V/v/B/b to set the current time (day, hour, minute, and
AM/PM).
3 Press MENU to exit Settings.
Power Saving Select to reduce the power consumption by adjusting the backlight brightness. This also
enhances the black level. Select from Off, Low, High and Picture Off.
Light Sensor Select On to enable the automatic picture (screen) brightness control. The light sensor
measures the room brightness which allows the TV to automatically adjust the backlight
brightness based on the picture settings and the ambient room light conditions.
Be sure not to put anything around the sensor, as its function may be affected.
See page 21 on the sensor.
In low light the range of the backlight control is reduced when Light Sensor is
set to On.
Quiet Power On Select to have the TV volume start at the minimum volume and gradually change to the set
level when you turn it on.
Speaker On Select to turn on the TV speakers.
Off Select to turn off the TV speakers and listen to the TV’s sound only
through your external audio receiver and speakers.
Audio Out
Easy control of volume
adjustments
Variable When Speaker is set to Off, the audio output from your audio system
can be controlled by the TV’s remote control.
Fixed When Speaker is set to Off, the audio output of the TV is fixed. Use
your audio receiver’s remote control to adjust the volume (and other
audio settings) through your audio system.
Cable On Select if you are receiving cable channels via Cable TV provider.
Off Select if you are using an antenna.
You should run Auto Program after changing the Cable setting.
Information Select to display the equipment information of your TV.
Option Description
(Continued)