Toshiba SD900KY Car Video System User Manual


 
33
Function setup
Video Out
1) Press SETUP button.
2) Press
/ button to select Video.
3) Press
button, then use the / button to select
Video Out.
4) Press ENTER button, then use the / button to select
the output mode (Composite or HDMI).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Composite: Select if you connect the DVD to your TV
via composite video (yellow) input.
HDMI: High Definition Multimedia Interface. Select if
you connect the DVD to TV via HDMI input.
HDMI Resolution
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select
HDMI Resolution.
4) Press ENTER button, then use the / button to
select the options (Auto, 480p/576p, 720p, 1080i or
1080p).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Notes
If the Video Out is not set to “HDMI”, you cannot select
the “HDMI Resolution”.
Select the HDMI resolution according to the performance
of the connected TV.
HD JPEG Mode
1) Press SETUP button.
2) Press
/ button to select Video.
3) Press
button, then use the / button to select HD
JPEG Mode.
4) Press ENTER button, then use the / button to select
On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
On: JPEG image is displayed in a suitable picture quality
(480p/576p, 720p, 1080i or 1080p).
Off: The picture quality is fixed to 480p/576p.
TV System
1) Press SETUP button.
2) Press
/ button to select Video.
3) Press
button, then use the / button to select
TV System.
4) Press ENTER button, then use the / button to
shift and change the TV system.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
NTSC: Select if your TV system is NTSC.
PAL: Select if your TV system is PAL.
Auto: The DVD player automatically identifies PAL or
NTSC video system of a disc. Connect a
multisystem TV (PAL / NTSC compatible) to view
a picture. A playback picture may be distorted
when detected a signal change between PAL
and NTSC on the disc. For the case of
Progressive mode, your multisystem TV must be
able to support 525p and 625p.
Aspect Ratio
: 16 :9
HDMI Resolution
: Auto Fit
:PAL
HDMI
Video Out
HD JPEG Mode
TV System
Composite
JPEG Interval
: 5 seconds
Aspect Ratio
: 16 :9
HDMI Resolution
: Auto Fit
Auto
Video Out
NTSC
TV System
PAL
HD JPEG Mode
JPEG Interval
: 5 seconds
Aspect Ratio
: 16 :9
: Auto Fit
:PAL
720p
Video Out
TV System
480p/576p
Auto
HDMI Resolution
HD JPEG Mode
1080i
1080p
JPEG Interval
Aspect Ratio
: 16 :9
: Auto Fit
Video Out
:PAL
On
Off
HDMI Resolution
HD JPEG Mode
TV System
: HDMI
JPEG Interval
Notes
If the Video Out is not set to “HDMI”, you cannot select
the “HD JPEG Mode”.
All JPEG pictures will not be output through the VIDEO
OUT jack when 720p, 1080i, 1080p or Auto is selected
with HD JPEG Mode on.
For HDMI output, DISPLAY and ZOOM buttons only work
in 480p/576p resolution mode when HD JPEG Mode is
On.