Toshiba SD900KY Car Video System User Manual


 
35
Function setup
Setting details
Set Password
New Password can be set to replace the default password.
1) Press SETUP button.
2) Press
/ button to select Rating.
3) Press
button, then use the / button to select Set
Password.
4) Press ENTER button. “Enter Password” screen will
appear.
5) Press the number buttons to input the current
password (If the password has not been set yet after
you purchase this unit, it is “8888”). Then press
ENTER.
6) Press ENTER button again, “New Password” screen will
appear. Press the number buttons to input the new
password.
7) Press ENTER button, “Confirm Password” screen will
appear. Enter the same password again for confirmation.
8) Press ENTER button. Now your new password has been
set. Be sure to remember this number!
If you forget the password, you can erase your
current password by pressing number button 8
on the remote control four times, then press
ENTER button to confirm the setting.
PASSWORD: 8888
DVD
Misc
Use Default Settings
If you want to return the initial language setting such as
Language, Video, Audio and etc. to the factory default, do
the following:
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button to select Use Default Settings, then
press ENTER button.
4) Press / button to select “Yes”, then press ENTER
button. The original setting will be restored.
Note
When you reset the DVD player to the factory default, the
DVD player will take 3-5 seconds to reset.
4) Press “8888” using
number buttons.
(Please note, this is
presetting password of this unit). Then press ENTER.
Press ENTER again to list the parental level.
Enter Password:
Set Password
Parental Control : 8. Adult
The parental lock level is equivalent to the following
ratings:
Level 1: Kid Safe
Level 2: G
Level 3: PG
Level 4: PG-13
5) Press / to select the rating from 1 to 8. Rating one
(1) has the most restrictions while rating eight (8) can
virtually playback all DVD software.
6) Press OPEN/CLOSE button to activate the Parental Level
setting.
If the DVD has been designed to temporarily cancel the
Parental Level, the screen will change depending on which
disc is played. If you select “YES” with the ENTER
button, “Enter Password” screen will appear. Input the 4-
digit password as you have set then followed by ENTER
button and playback will start. If “NO” is selected, press
the OPEN/CLOSE to remove the disc.
Notes
• If you input a wrong password, press CLEAR button
and re-enter your 4-digit password again.
• You cannot play DVDs rated higher than the level you
selected unless you cancel the parental lock function.
Level 5: PG-R
Level 6: R
Level 7: NC-17
Level 8: Adult
Set Password
Parental Control : 8. Adult
Rating
Parental Control
DVDs equipped with the password function are rated
according to their content. The contents allowed by a parental
lock level and the way a DVD can be controlled may vary
from disc to disc.
For example, if the disc allowed, you could edit out violent
scenes unsuitable for children and replace them with more
suitable scenes, or you could lock out playback of the disc
altogether.
DVDs may or may not respond to the parental lock
settings. This is not a defect in the DVD player. Make
sure this function works with your DVDs.
1) Press SETUP button.
2) Press
/ to select Rating.
3) Press button to
select Parental
Control, then press
ENTER button.
“Enter Password”
screen will appear.
DVD
Screen saver :On
HDMI CEC :Off
Screen saver :On
Do you want to use default setting?