Filter
Top Products
User’s Manual 4-17
Operating Basics
5. Verification will be performed. If the authentication is successful, the image
data taken in step 4 will be faded in and placed over one another.
n If an error occurs during authentication, you will be returned to the Select
Tiles screen.
6. Windows Welcome screen will be displayed, and will be logged in
automatically to Windows.
1.1 Mode Login screen
1. Turn on the computer.
2. The Select Tiles screen will be displayed.
3. Select Start face recognition.
4. The Select Account screen will be displayed.
5. Select the account, and click the arrow button.
6. “Please face to the camera” will be displayed.
7. Verification will be performed. If the authentication is successful, the image
data taken in step 6 will be faded in and placed over one another.
n If an error occurs during authentication, you will be returned to the Select
Tiles screen.
8. Windows Welcome screen will be displayed, and will be logged in
automatically to Windows.
n If authentication was successful, but an authentication error subsequently
occurred during the login to Windows, you will be asked to provide your
account information.
Using the optical disc drive
The text and illustrations in this section refer primarily to the optical disk drive.
However, operation is the same for all other optical media drives. The full-size
drive provides high-performance execution of CD/DVD/HD DVDbased programs.
You can run either 12 cm (4.72”) or 8 cm (3.15”) CDs/DVDs at tray ODD and
12 cm (4.72”) CDs/DVDs at slot ODD without an adaptor. An ATAPI interface
controller is used for CD/DVD/HD DVD operation. When the computer is
accessing a CD/DVD/HD DVD, an indicator on the drive glows (Only tray ODD).
Refer also to the Writing CD/DVDs on DVD Super Multi Double Layer drive
section for precautions on writing to CD/DVD.